metatex 2272

Description

  • good mechanical and electrical properties
  • high tracking resistance
  • hardly inflammable
  • resistant to aggressive environmental influences

Applications

  • creep-resistant electrical insulation point
  • cable bushings
  • switchgear construction in the low voltage range

EigenschaftPrüfung nachEinheitEigenschaftswert
BiegefestigkeitDIN 53452MPa340
BiegefestigkeitDIN 7735MPa270
SchlagzähigkeitDIN 53453KJ/m2125
SchlagzähigkeitDIN 7735KJ/m250
KerbschlagzähigkeitDIN 53453KJ/m268
KerbschlagzähigkeitDIN 7735KJ/m230
ZugfestigkeitDIN 53455MPa260
ZugfestigkeitDIN 7735MPa120
DruckfestigkeitDIN 53454MPa240
DruckfestigkeitDIN 7735MPa180
SpaltkraftDIN 53463N3100
SpaltkraftDIN 7735N1800
ElastizitätsmodulDIN 53452MPa22 x 10^3
ElastizitätsmodulDIN 7735MPa14 x 10^3

EigenschaftPrüfung nachEinheitEigenschaftswert
Widerstand zwischen den StöpselnDIN 53482Ohm10^9
Widerstand zwischen den StöpselnDIN 7735Ohm10^7
HochspannungsfestigkeitDIN 53481KV38/27
HochspannungsfestigkeitDIN 7735KV20/25
Dielektrischer Verlustfaktor (1 MHz)DIN 53483 0,04
Dielektrischer Verlustfaktor (1 MHz)DIN 7735 --
DieletrizitätskonstanteDIN 53483 5
DieletrizitätskonstanteDIN 7735 5
Kriechstromfestigkeit CTIDIN/IEC 112 600
Kriechstromfestigkeit CTIDIN 7735 600
Elektrische KorrosionDIN 53489 AB 2
Elektrische KorrosionDIN 7735 AB 2

EigenschaftPrüfung nachEinheitEigenschaftswert
GrenztemperaturVDE 0304, T.21°C130
GrenztemperaturDIN 7735°C130
WärmeleitfähigkeitDIN 52672W/mK0,3
WärmeleitfähigkeitDIN 7735W/mK0,3
LängenausdehnungskoeffizientVDE 0304K^-11,2 x 10^-5
LängenausdehnungskoeffizientDIN 7735K^-1ca. 1 - 2 x 10^-5
WärmeklasseVDE 0534 B
WärmeklasseDIN 7735 B
GlutbeständigkeitDIN 53459 2a
GlutbeständigkeitDIN 7735 2a

EigenschaftPrüfung nachEinheitEigenschaftswert
RohdichteDIN 53479g/cm31,95
RohdichteDIN 7735g/cm31,8 - 2,0
Wasseraufnahme 5 mm DickeDIN 53495mg210
Wasseraufnahme 5 mm DickeDIN 7735mg370
BrennbarkeitUL 94StufeV0
BrennbarkeitDIN 7735Stufe 
Farbe  altweiß
FarbeDIN 7735 altweiß

Notes for users:

The information given in the data sheets reflects our current level of knowledge. Due to the information contained in the data sheets, certain properties can neither be agreed nor guaranteed. The decision about the suitability of a material for a specific application is the responsibility of each user. We reserve the right to make changes to the data given. The information cannot simply be transferred to finished parts.

to top